Assigning Your Phone Number To Your Phone; Ip Address/Phone Number Announcement - Cisco 7960 User Manual
Hide thumbs
Also See for 7960:
- Administrator's manual (212 pages) ,
- User manual (186 pages) ,
- Administration manual (150 pages)
Table of Contents
Advertisement
It also allows you to find out the telephone number and IP address assigned to any
telephone. Using the Configurator, you can also re-assign your phone number to
another telephone of a similar type (usually for a temporary period at another
location) and then re-assign the number to back your regular telephone set.
Assigning Your Phone Number to Your Phone
When your phone is first installed, you may need to assign your phone number to
your phone. Your administrator should provide both your phone number and a
password to allow you to do this.
NOTE: Once you have assigned your phone number to your phone, you may
be required to change your password. If not, it is recommended that you
change it for security.
To assign your phone number:
1.
Take the phone off-hook or press the Speaker button.
2.
Enter your complete telephone number and press #.
3.
Enter your password and press #.
4.
Hang up the phone.
5.
Wait for the phone to reboot.
6.
When your telephone indicates that it is back online, you can use the phone.
NOTE: If you accidentally press more than one line button and have the Phone
Configurator active on multiple lines, finish the assignment process on one of
the lines. Any additional active calls to the Phone Configurator are on hold.
When the phone becomes active, disconnect the held call.
NOTE: On the Cisco 7940 phone, if you have the second line set to a queue
or something other than your prime line, the Phone Configurator will not be
able to reassign your phone number. It uses the second line appearance to
configure the phone.
IP Address/Phone Number Announcement
The IP address and phone number announcement feature of the Phone
Configurator function allows dialing an extension to hear the IP address or phone
number of the phone. This is especially useful in conference rooms with analog
speaker phones or at other locations with an analog phone where the phone
number is unknown.
•
•
NOTE: These access codes are the default access codes for the system and
your access codes may be different. Check with the system administrator for
the correct access codes if the default codes do not work.
Cisco 7960/7940 Telephone User Guide
621-00000116
To hear the phone number, dial 585.
To hear the IP address assigned to a phone, dial 586.
System Telephone Features
57
- Quick Links:
- Accessing Phone Features
- Call Forwarding
Hide quick links:
Advertisement
Table of Contents
