Show Controllers Tcam - Cisco Catalyst 3750 Command Reference Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show controllers tcam
Use the show controllers tcam privileged EXEC command to display the state of the registers for all
ternary content addressable memory (TCAM) in the system and for all TCAM interface ASICs that are
CAM controllers.
Syntax Description
asic
number
detail
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.1(11)AX
12.1(14)EA1
Usage Guidelines
This display provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
78-16181-01
show controllers tcam [asic [number]] [detail] [ | {begin | exclude | include} expression]
(Optional) Display port ASIC TCAM information.
(Optional) Display information for the specified port ASIC number. The range is
from 0 to 15.
(Optional) Display detailed TCAM register information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The asic [number] keywords were added.
show controllers tcam
Catalyst 3750 Switch Command Reference
2-269
- Quick Links:
- Boot System
Hide quick links:
Advertisement
Table of Contents
