Mls Qos Srr-Queue Output Dscp-Map - Cisco Catalyst 3750 Command Reference Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
mls qos srr-queue output dscp-map
mls qos srr-queue output dscp-map
Use the mls qos srr-queue output dscp-map global configuration command on the switch stack or on
a standalone switch to map Differentiated Services Code Point (DSCP) values to an egress or to map
DSCP values to a queue and to a threshold ID. Use the no form of this command to return to the default
setting.
Syntax Description
queue queue-id
dscp1...dscp8
threshold threshold-id
dscp1...dscp8
Defaults
Table 2-13
Table 2-13 Default DSCP Output Queue Threshold Map
DSCP Value
Queue ID - Threshold ID
Command Modes
Global configuration
Command History
Release
12.1(11)AX
Catalyst 3750 Switch Command Reference
2-184
mls qos srr-queue output dscp-map queue queue-id {dscp1...dscp8 | threshold threshold-id
dscp1...dscp8}
no mls qos srr-queue output dscp-map
Specify a queue number.
For queue-id, the range is 1 to 4.
Map DSCP values to an egress queue.
For dscp1...dscp8, enter up to eight values, and separate each value with a
space. The range is 0 to 63.
Map DSCP values to a queue threshold ID.
For threshold-id, the range is 1 to 3.
For dscp1...dscp8, enter up to eight values, and separate each value with a
space. The range is 0 to 63.
shows the default DSCP output queue threshold map:
Modification
This command was introduced.
0–15
16–31
32–39
2 - 1
3 - 1
4 - 1
Chapter 2
Catalyst 3750 Switch Cisco IOS Commands
40–47
48–63
1 - 1
4 - 1
78-16181-01
- Quick Links:
- Boot System
Hide quick links:
Advertisement
Table of Contents
