Show Platform Ip Unicast - Cisco Catalyst 3750 Command Reference Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
show platform ip unicast
show platform ip unicast
Use the show platform ip unicast privileged EXEC command to display platform-dependent IP unicast
routing information.
Syntax Description
adjacency
cef-idb
counts
dhcp
failed {adjacency |
arp [A.B.C.D] | route}
mpaths
route
standby
statistics
trace
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.1(11)AX
Catalyst 3750 Switch Command Reference
C-10
show platform ip unicast {adjacency | cef-idb | counts | dhcp | failed {adjacency | arp [A.B.C.D]
| route} | mpaths | route | standby | statistics | trace} [ | {begin | exclude | include}
expression]
Display the platform adjacency database.
Display platform information corresponding to Cisco Express Forwarding
(CEF) interface descriptor block.
Display the current counts for the Layer 3 unicast databases.
Display the Dynamic Host Configuration Protocol (DHCP) system dynamic
addresses.
Display the hardware resource failures. The keywords have these meanings:
adjacency—Display the adjacency entries that failed to be programmed
•
in hardware.
•
arp—Display the Address Resolution Protocol (ARP) deletions because
of failure and because of retries.
•
A.B.C.D—(Optional) Prefix of the ARP entries to display.
route—Display the route entries that failed to be programmed in
•
hardware.
Display the Layer 3 unicast routing multipath adjacency database.
Display the platform route database.
Display the platform standby information.
Display the Layer 3 unicast routing accumulated statistics.
Display the platform event trace logs.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C
Catalyst 3750 Switch Show Platform Commands
78-16181-01
- Quick Links:
- Boot System
Hide quick links:
Advertisement
Table of Contents
