Mls Qos Srr-Queue Input Buffers - Cisco Catalyst 3750 Command Reference Manual

Hide thumbs Also See for Catalyst 3750:

Table of Contents

mls qos srr-queue input buffers

Use the mls qos srr-queue input buffers global configuration command on the switch stack or on a

standalone switch to allocate the buffers between the ingress queues. Use the no form of this command

to return to the default setting.

Syntax Description

Ninety percent of the buffers is allocated to queue 1, and 10 percent of the buffers is allocated to queue 2.

Command Modes

Global configuration

Command History

Usage Guidelines

You should allocate the buffers so that the queues can handle any incoming bursty traffic.

This example shows how to allocate 60 percent of the buffer space to ingress queue 1 and 40 percent of

the buffer space to ingress queue 2:

Switch(config)# mls qos srr-queue input buffers 60 40

You can verify your settings by entering the show mls qos interface [interface-id] buffers or the show

mls qos input-queue privileged EXEC command.

Catalyst 3750 Switch Command Reference

mls qos srr-queue input buffers percentage1 percentage2

no mls qos srr-queue input buffers

Percentage of buffers allocated to ingress queues 1 and 2. The range is 0 to

100. Separate each value with a space.

Modification

This command was introduced.

Catalyst 3750 Switch Cisco IOS Commands

Show Quick Links

Table of Contents