Show Boot - Cisco Catalyst 3750 Command Reference Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
show boot
Table 2-16 show boot Field Descriptions
Field
BOOT path-list
Config file
Private Config file
Enable Break
Manual Boot
Helper path-list
Auto upgrade
NVRAM/Config file buffer size
Related Commands
Command
boot auto-copy-sw
boot config-file
boot enable-break
boot manual
boot
private-config-file
boot system
Catalyst 3750 Switch Command Reference
2-248
Description
Displays a semicolon separated list of executable files to try to load and execute when
automatically booting.
If the BOOT environment variable is not set, the system attempts to load and execute
the first executable image it can find by using a recursive, depth-first search through the
flash file system. In a depth-first search of a directory, each encountered subdirectory
is completely searched before continuing the search in the original directory.
If the BOOT variable is set but the specified images cannot be loaded, the system
attempts to boot the first bootable file that it can find in the flash file system.
Displays the filename that Cisco IOS uses to read and write a nonvolatile copy of the
system configuration.
Displays the filename that Cisco IOS uses to read and write a nonvolatile copy of the
system configuration.
Displays whether a break during booting is enabled or disabled. If it is set to yes, on, or
1, you can interrupt the automatic boot process by pressing the Break key on the console
after the flash file system is initialized.
Displays whether the switch automatically or manually boots. If it is set to no or 0, the
boot loader attempts to automatically boot the system. If it is set to anything else, you
must manually boot the switch from the boot loader mode.
Displays a semicolon separated list of loadable files to dynamically load during the boot
loader initialization. Helper files extend or patch the functionality of the boot loader.
Displays whether the switch stack is set to automatically copy its software version to an
incompatible switch so that it can join the stack.
A switch in version-mismatch (VM) mode is a switch that has a different stack protocol
version than the version on the switch stack. Switches in VM mode cannot join the
switch stack. If the switch stack has an image that can be copied to a switch in VM
mode, and if the
boot auto-copy-sw
copies the image from another stack member to the switch in VM mode. The switch then
exits VM mode, reboots, and joins the switch stack.
Displays the buffer size that Cisco IOS uses to hold a copy of the configuration file in
memory. The configuration file cannot be larger than the buffer size allocation.
Description
Automatically upgrade switches in version-mismatch (VM) mode with the
switch stack image.
Specifies the filename that Cisco IOS uses to read and write a nonvolatile
copy of the system configuration.
Enables interrupting the automatic boot process.
Enables manually booting the switch during the next boot cycle.
Specifies the filename that Cisco IOS uses to read and write a nonvolatile
copy of the private configuration.
Specifies the Cisco IOS image to load during the next boot cycle.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
feature is enabled, the switch stack automatically
78-16181-01
- Quick Links:
- Boot System
Hide quick links:
Advertisement
Table of Contents
