Cisco Catalyst 3750 Command Reference Manual page 184
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
mls qos aggregate-policer
You cannot delete an aggregate policer if it is being used in a policy map. You must first use the no police
aggregate aggregate-policer-name policy-map class configuration command to delete the aggregate
policer from all policy maps before using the no mls qos aggregate-policer aggregate-policer-name
command.
Policing uses a token-bucket algorithm. You configure the bucket depth (the maximum burst that is
tolerated before the bucket overflows) by using the burst-byte option of the police policy-map class
configuration command or the mls qos aggregate-policer global configuration command. You configure
how fast (the average rate) that the tokens are removed from the bucket by using the rate-bps option of
the police policy-map class configuration command or the mls qos aggregate-policer global
configuration command. For more information, refer to the software configuration guide for this release.
Examples
This example shows how to define the aggregate policer parameters and how to apply the policer to
multiple classes in a policy map:
Switch(config)# mls qos aggregate-policer agg_policer1 10000 1000000 exceed-action drop
Switch(config)# policy-map policy2
Switch(config-pmap)# class class1
Switch(config-pmap-c)# police aggregate agg_policer1
Switch(config-pmap-c)# exit
Switch(config-pmap)# class class2
Switch(config-pmap-c)# set ip dscp 10
Switch(config-pmap-c)# police aggregate agg_policer1
Switch(config-pmap-c)# exit
Switch(config-pmap)# class class3
Switch(config-pmap-c)# trust dscp
Switch(config-pmap-c)# police aggregate agg_policer2
Switch(config-pmap-c)# exit
You can verify your settings by entering the show mls qos aggregate-policer privileged EXEC
command.
Related Commands
Command
police aggregate
show mls qos aggregate-policer
Catalyst 3750 Switch Command Reference
2-158
Chapter 2
Description
Creates a policer that is shared by different classes.
Displays the quality of service (QoS) aggregate policer
configuration.
Catalyst 3750 Switch Cisco IOS Commands
78-16181-01
- Quick Links:
- Boot System
Hide quick links:
Advertisement
Table of Contents
