Debug Ip Igmp Snooping - Cisco Catalyst 3750 Command Reference Manual

Hide thumbs Also See for Catalyst 3750:

Table of Contents

debug ip igmp snooping

Use the debug igmp snooping privileged EXEC command to enable debugging of Internet Group

Management Protocol (IGMP) snooping activity. Use the no form of this command to disable debugging

Syntax Description

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The undebug ip igmp snooping command is the same as the no debug ip igmp snooping command.

When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack

member, you must start a session from the stack master by using the session switch-number privileged

EXEC command. Then enter the debug command at the command-line prompt of the stack member.

Related Commands

debug platform ip

igmp snooping

show debugging

Catalyst 3750 Switch Command Reference

debug ip igmp snooping [group | management | router | timer]

no debug ip igmp snooping [group | management | router | timer]

(Optional) Display IGMP snooping group activity debug messages.

(Optional) Display IGMP snooping management activity debug messages.

(Optional) Display IGMP snooping router activity debug messages.

(Optional) Display IGMP snooping timer event debug messages.

Modification

This command was introduced.

Displays information about platform-dependent IGMP snooping activity.

Displays information about the types of debugging that are enabled. For

syntax information, select Cisco IOS Release 12.2 Configuration Guides

and Command References > Cisco IOS Configuration Fundamentals

Configuration Guide, Release 12.2 > System Management >

Troubleshooting and Fault Management.

Catalyst 3750 Switch Debug Commands

Show Quick Links

Table of Contents