Switch Priority - Cisco Catalyst 3750 Command Reference Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
switch priority
Use the switch priority global configuration command on the stack master to change the stack member
priority value.
Syntax Description
priority new-priority-value
stack-member-number
Defaults
The default priority value is 1.
Command Modes
Global configuration
Command History
Release
12.1(11)AX
Usage Guidelines
If you do not specify a priority value, the default value is assigned.
The new priority value is a factor during a stack-master re-election. Therefore, changing the priority
value does not change the stack master immediately.
Use the reload slot current stack member number privileged EXEC to reset the stack member and apply
this configuration change into effect.
Examples
This example shows how to change the priority value of stack member 6 to 9:
Switch(config)# switch 6 priority 9
Changing the Switch Priority of Switch Number 6 to 9
Do you want to continue?[confirm]
Related Commands
Command
reload
session
switch renumber
show switch
78-16181-01
switch stack-member-number priority new-priority-value
Modification
This command was introduced.
Description
Resets the stack member and puts a configuration change into effect.
Accesses a specific stack member.
Changes the stack member number.
Displays information about the switch stack and its stack members.
Specify the new stack member priority value. The range is 1 to 15.
Specify the current stack member number. The range 1 to 9.
Catalyst 3750 Switch Command Reference
switch priority
2-471
- Quick Links:
- Boot System
Hide quick links:
Advertisement
Table of Contents
