hit counter script

Set - Cisco Catalyst 3750 Command Reference Manual

Hide thumbs Also See for Catalyst 3750:
Table of Contents

Advertisement

set

set
Use the set policy-map class configuration command on the switch stack or on a standalone switch to
classify IP traffic by setting a Differentiated Services Code Point (DSCP) or an IP-precedence value in
the packet. Use the no form of this command to remove traffic classification.
Syntax Description
ip dscp new-dscp
ip precedence new-precedence
Defaults
No traffic classification is defined.
Command Modes
Policy-map class configuration
Command History
Release
12.1(11)AX
Usage Guidelines
The set command is mutually exclusive with the trust policy-map class configuration command within
the same policy map.
For the set ip dscp new-dscp or the set ip precedence new-precedence command, you can enter a
mnemonic name for a commonly used value. For example, you can enter the set ip dscp af11 command,
which is the as same entering the set ip dscp 10 command. You can enter the set ip precedence critical
command, which is the same as entering the set ip precedence 5 command. For a list of supported
mnemonics, enter the set ip dscp ? or the set ip precedence ? command to see the command-line help
strings.
To return to policy-map configuration mode, use the exit command. To return to privileged EXEC mode,
use the end command.
Catalyst 3750 Switch Command Reference
2-234
set {ip dscp new-dscp | ip precedence new-precedence}
no set {ip dscp new-dscp | ip precedence new-precedence}
Modification
This command was introduced.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
New DSCP value assigned to the classified traffic. The range is
0 to 63. You also can enter a mnemonic name for a commonly used
value.
New IP-precedence value assigned to the classified traffic. The
range is 0 to 7. You also can enter a mnemonic name for a
commonly used value.
78-16181-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents