Show Dtp - Cisco Catalyst 3750 Command Reference Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
show dtp
show dtp
Use the show dtp privileged EXEC command to display Dynamic Trunking Protocol (DTP) information
for the switch or for a specified interface.
Syntax Description
interface
interface-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.1(11)AX
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show dtp command:
Switch# show dtp
Global DTP information
Catalyst 3750 Switch Command Reference
2-274
show dtp [interface interface-id] [ | {begin | exclude | include} expression]
(Optional) Display port security settings for the specified interface. Valid interfaces
include physical ports (including type, stack member, module, and port number).
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Sending DTP Hello packets every 30 seconds
Dynamic Trunk timeout is 300 seconds
21 interfaces using DTP
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
78-16181-01
- Quick Links:
- Boot System
Hide quick links:
Advertisement
Table of Contents
