Cisco Catalyst 3750 Command Reference Manual page 437
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
envmon
flash
fru-ctrl
hsrp
ipmulticast
mac-notification
mdsp
pim
port-security
rtr
snmp
stpx
syslog
tty
vlancreate
vlandelete
vlan-membership
vtp
Defaults
This command is disabled by default. No notifications are sent.
If you enter this command with no keywords, the default is to send all trap types to the host. No informs
are sent to this host.
If no version keyword is present, the default is Version 1.
If Version 3 is selected and no authentication keyword is entered, the default is the noauth
(noAuthNoPriv) security level.
Note
If the community-string is not defined by using the snmp-server community global configuration
command before using this command, the default form of the snmp-server community command is
automatically inserted into the configuration. The password (community-string) used for this automatic
configuration of the snmp-server community will be the same as that specified in the snmp-server host
command.
Command Modes
Global configuration
Command History
Release
12.1(11)AX
78-16181-01
(Optional) Generate environmental monitor traps.
(Optional) Enable SNMP FLASH notifications.
(Optional) Generate entity FRU control traps. In the switch stack, this trap
refers to the insertion or removal of a switch in the stack.
(Optional) Send Hot Standby Router Protocol (HSRP) traps.
(Optional) Enable IP multicast routing traps.
(Optional) Send MAC notification traps.
(Optional) Enable Multicast Source Discovery Protocol (MSDP) traps.
(Optional) Enable Protocol-Independent Multicast (PIM) traps.
(Optional) Send port security traps.
(Optional) Send SNMP Response Time Reporter traps.
(Optional) Send SNMP-type traps.
(Optional) Enable SNMP STP extended MIB traps.
(Optional) Enable SNMP syslog traps.
(Optional) Send Transmission Control Protocol (TCP) connection traps.
(Optional) Enable SNMP VLAN-created traps.
(Optional) Enable SNMP VLAN-deleted traps.
(Optional) Send SNMP VLAN membership traps.
(Optional) Send VLAN Trunking Protocol (VTP) traps.
Modification
This command was introduced.
Catalyst 3750 Switch Command Reference
snmp-server host
2-411
- Quick Links:
- Boot System
Hide quick links:
Advertisement
Table of Contents
