Debug Matm - Cisco Catalyst 3750 Command Reference Manual

Hide thumbs Also See for Catalyst 3750:

Table of Contents

Catalyst 3750 Switch Debug Commands

debug matm

Use the debug matm privileged EXEC command to enable debugging of platform-independent MAC

address management. Use the no form of this command to disable debugging output.

Syntax Description

This command has no arguments or keywords.

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The undebug matm command is the same as the no debug matm command.

When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack

member, you must start a session from the stack master by using the session switch-number privileged

EXEC command. Then enter the debug command at the command-line prompt of the stack member.

Related Commands

debug platform matm

show debugging

no debug matm

Modification

This command was introduced.

Displays information about platform-dependent MAC address management.

Displays information about the types of debugging that are enabled. For

syntax information, select Cisco IOS Release 12.2 Configuration Guides

and Command References > Cisco IOS Configuration Fundamentals

Configuration Guide, Release 12.2 > System Management >

Troubleshooting and Fault Management.

Catalyst 3750 Switch Command Reference

Show Quick Links

Table of Contents