Debug Platform Ipc - Cisco Catalyst 3750 Command Reference Manual

Hide thumbs Also See for Catalyst 3750:

Table of Contents

Catalyst 3750 Switch Debug Commands

debug platform ipc

Use the debug platform ipc privileged EXEC command to enable debugging of the platform-dependent

Interprocess Communication (IPC) Protocol. Use the no form of this command to disable debugging

Syntax Description

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The undebug platform ipc command is the same as the no debug platform ipc.

When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack

member, you must start a session from the stack master by using the session switch-number privileged

EXEC command. Then enter the debug command at the command-line prompt of the stack member.

Related Commands

show debugging

debug platform ipc {all | init | receive | send | trace}

no debug platform {all | init | receive | send | trace}

Display all platform IPC debug messages.

Using this command can degrade the performance of the switch.

Display debug messages related to IPC initialization.

Display IPC traces each time an IPC packet is received by the switch.

Display IPC traces each time an IPC packet is sent by the switch.

Display IPC trace debug messages, tracing the code path as the IPC functions are

Modification

This command was introduced.

Displays information about the types of debugging that are enabled. For

syntax information, select Cisco IOS Release 12.2 Configuration Guides

and Command References > Cisco IOS Configuration Fundamentals

Configuration Guide, Release 12.2 > System Management >

Troubleshooting and Fault Management.

Catalyst 3750 Switch Command Reference

debug platform ipc

Show Quick Links

Table of Contents