Debug Nvram - Cisco Catalyst 3560-X Command Reference Manual

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

Catalyst 3750-X and 3560-X Switch Debug Commands

debug nvram

Syntax Description

Command Modes

Command History

Usage Guidelines

Related Commands

Downloaded from

www.Manualslib.com

Use the debug nvram privileged EXEC command to enable debugging of NVRAM activity. Use the no

form of this command to disable debugging.

no debug nvram

This command has no arguments or keywords.

Debugging is disabled.

Privileged EXEC

The undebug nvram command is the same as the no debug nvram command.

When you enable debugging on a switch stack, it is enabled only on the stack master. To enable

debugging on a stack member, you can start a session from the stack master by using the session

switch-number privileged EXEC command. Then enter the debug command at the command-line

prompt of the stack member. You also can use the remote command stack-member-number LINE

privileged EXEC command on the stack master switch to enable debugging on a member switch without

first starting a session.

show debugging

manuals search engine

Modification

This command was introduced.

Displays information about the types of debugging that are enabled.

Catalyst 3750-X and 3560-X Switch Command Reference

Catalyst 3750-x