Debug Platform Frontend-Controller - Cisco Catalyst 3560-X Command Reference Manual
Hide thumbs
Also See for Catalyst 3560-X:
- Software configuration manual (1538 pages) ,
- Command reference manual (1244 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
debug platform frontend-controller
debug platform frontend-controller
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
B-48
Downloaded from
www.Manualslib.com
Use the debug platform frontend-controller privileged EXEC command to enable debugging of
front-end controller activity. Use the no form of this command to disable debugging.
debug platform frontend-controller {all | image | led | manager | poe | register | thermal}
no debug platform frontend-controller {all | image | led | manager | poe | register | thermal}
all
Display all the debug messages for front-end controller.
image
Display Image Manager debug messages.
led
Display LED debug messages.
manager
Display front-end-controller manager debug messages.
poe
Display Power over Ethernet (PoE) debug messages.
register
Display Register Access debug messages.
thermal
Display thermal debug messages.
Debugging is disabled.
Privileged EXEC
Release
Modification
12.2(53)SE2
This command was introduced.
The undebug platform frontend-controller command is the same as the no debug platform
frontend-controller command.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Command
Description
show platform
Displays counter and status information for the front-end controller
frontend-controller
manager and subordinate applications, and displays the hardware and
software information for the front-end controller.
show debugging
Displays information about the types of debugging that are enabled.
manuals search engine
Appendix B
Catalyst 3750-X and 3560-X Switch Debug Commands
OL-21522-02
Advertisement
Table of Contents
