ABB ACS880 Manual page 422
Primary control program
Hide thumbs
Also See for ACS880:
- User manual ,
- Firmware manual (764 pages) ,
- Quick start up manual (146 pages)
Table of Contents
Advertisement
422 Parameters
No.
Name / Range /
Selection
50.41
FBA B act2
transparent source
Not selected
Other
50.42
FBA B debug mode
Disable
Fast
50.43
FBA B control word
00000000...FFFFFFFFh
50.44
FBA B reference 1
50.45
FBA B reference 2
50.46
FBA B status word
00000000...FFFFFFFFh
50.47
FBA B actual value 1
50.48
FBA B actual value 2
Description
When parameter
50.38 FBA B actual 2 type
Transparent
or General, this parameter selects the source
of actual value 2 transmitted to the fieldbus network through
fieldbus adapter B.
No source selected.
See
Terms and abbreviations (page
Enables the display of raw (unmodified) data received from
and sent to fieldbus adapter B in parameters 50.43...50.48.
This functionality should only be used for debugging.
Note: This parameter cannot be changed while the drive
is running.
Display of raw data from fieldbus adapter B disabled.
Display of raw data from fieldbus adapter B enabled.
Displays the raw (unmodified) control word sent by the
master (PLC) to fieldbus adapter B if debugging is enabled
by parameter
50.42 FBA B debug
This parameter is read-only.
Control word sent by master to fieldbus adapter B.
Displays raw (unmodified) reference REF1 sent by the
master (PLC) to fieldbus adapter B if debugging is enabled
by parameter
50.42 FBA B debug
This parameter is read-only.
Displays raw (unmodified) reference REF2 sent by the
master (PLC) to fieldbus adapter B if debugging is enabled
by parameter
50.42 FBA B debug
This parameter is read-only.
Displays the raw (unmodified) status word sent by fieldbus
adapter B to the master (PLC) if debugging is enabled by
parameter
50.42 FBA B debug
This parameter is read-only.
Status word sent by fieldbus adapter B to master.
Displays raw (unmodified) actual value ACT1 sent by
fieldbus adapter B to the master (PLC) if debugging is
enabled by parameter
50.42 FBA B debug
This parameter is read-only.
Displays raw (unmodified) actual value ACT2 sent by
fieldbus adapter B to the master (PLC) if debugging is
enabled by parameter
50.42 FBA B debug
This parameter is read-only.
is set to
132).
mode.
mode.
mode.
mode.
mode.
mode.
Def / Type
FbEq 16b / 32b
Not selected / uint32
0
Disable / uint16
0
1
0 / uint32
1 = 1
- / int32
- / int32
0 / uint32
1 = 1
- / int32
- / int32
Advertisement
Table of Contents
