Dynamic Bandwidth Selection Feature; Attaching Qos Service Policies; Service-Policy Command - Cisco 10000 Series Configuration Manual

Quality of service configuration guide

Hide thumbs Also See for 10000 Series:

Table of Contents

Quality of Service Overview

Dynamic Bandwidth Selection Feature

Cisco IOS Release: Release 12.2(16)BX

Description: The Dynamic Bandwidth Selection (DBS) feature was introduced on the PRE2 to

dynamically change ATM traffic shaping parameters based on a subscriber's RADIUS profile. This

feature is also known as Per User QoS Using AAA Policy Name.

Cisco IOS Release: Release 12.2(28)SB

Description: This feature was integrated in Cisco IOS Release 12.2(28)SB.

Documentation Reference:

Cisco IOS Release: Release 12.0(17)SL

Description: The service-policy command was introduced on the PRE1 to attach a policy map that the

router can use to apply QoS services to inbound and outbound packets.

Cisco IOS Release: Release 12.2(15)BX

Description: This command was introduced on the PRE2.

Cisco IOS Release: Release 12.3(7)XI2

Description: This command was enhanced on the PRE2 to allow you to attach a policy map to a range

of PVCs, and to a specific PVC within the PVC range.

Cisco IOS Release: Release 12.2(28)SB

Description: This command was integrated in Cisco IOS Release 12.2(28)SB.

Cisco IOS Release: Release 12.2(31)SB2

Description: This command was introduced on the PRE3.

Chapter 4, "Attaching Service Policies"

service-policy Command, page 1-13

Attaching ATM QoS Service Policies, page 1-14

Attaching Frame Relay QoS Service Policies, page 1-14

Attaching LAC QoS Service Policies, page 1-15

Attaching Virtual LAN QoS Service Policies, page 1-15

Attaching Virtual Access Interface QoS Service Policies, page 1-15

Cisco 10000 Series Router Quality of Service Configuration Guide

QoS Features, Commands, and Changes

Table of Contents