Example Of Setting Up Radius For Ppp Session Queuing On Atm Vcs; Verifying Ppp Session Queuing On Atm Vcs - Cisco 10000 Series Configuration Manual

Quality of service configuration guide

Hide thumbs Also See for 10000 Series:

Table of Contents

Queuing PPP Sessions on ATM VCs

Router(config-pmap-c)# police 8000

Router(config-pmap-c)# exit

Router(config-pmap)# policy-map parent

Router(config-pmap)# class class-default

Router(config-pmap-c)# shape 512000

Router(config-pmap-c)# service-policy child1

Router(config-pmap-c)# exit

Router(config-pmap)# exit

Router(config)# interface virtual-template 1

Router(config-if)# service-policy output parent

Example of Setting Up RADIUS for PPP Session Queuing on ATM VCs

Example 17-32

router. The first three lines of a subscriber's sample user profile contain the user password, service type,

and protocol type. This information is entered into the subscriber's user profile when the user profile is

first created. The last line is an example of the Cisco QoS AV-pair added to the user profile. The policy

map name downloaded to the router is p23.

Example 17-32 Setting Up RADIUS for PPP Session Queuing on ATM VCs

To verify PPPoA or PPPoEoA session queuing, use any of the following commands in privileged EXEC

Router# show policy-map [interface interface]

Cisco 10000 Series Router Quality of Service Configuration Guide

shows how to define the Cisco AV-pairs used to download the policy map name to the

Password = "cisco"

Service-Type = Framed,

Framed-Protocol = PPP,

cisco-avpair = "sub-qos-policy-out=p23"

Displays information about the policy map attached to the

interface you specify. If you do not specify an interface, it

displays information about all of the policy maps configured on

interface interface is the interface type and number (for example,

Configuring Dynamic Subscriber Services

Table of Contents