Hardware Supported - Cisco CATALYST 6000 Installation And Configuration Note
Catalyst 6000 series content switching module
Hide thumbs
Also See for CATALYST 6000:
- Manual (52 pages) ,
- Product bulletin (4 pages) ,
- Installation note (18 pages)
Table of Contents
Advertisement
System Requirements
Hardware Supported
Before you can use the CSM, you must have a Supervisor Engine 1A with an MSFC and a Policy Feature
Card (PFC), or a Supervisor Engine 2 with an MSFC, and any module with ports to connect server and
client networks. The PFC is required for the VLAN access control list (VACL) capture functionality.
The WS-X6066-SLB-APC Content Switching Module is not fabric enabled.
Caution
Product Number
Content Switching Module
WS-X6066-SLB-APC with
Supervisor Engine 1A
WS-X6066-SLB-APC with
Supervisor Engine 1A
WS-X6066-SLB-APC with
Supervisor Engine 2
Console Cable
72-876-01
Accessory Kit
800-05097-01
Environmental Requirements
The CSM operates in temperatures from 0
damage, nonoperating temperatures from –40
The CSM can operate in relative humidity from 10 to 90 percent (noncondensing) and can withstand,
without damage, nonoperating relative humidity of 5 to 95 percent (noncondensing).
Power Requirements
You can place the CSM in any slot in the Catalyst 6000 family chassis except for the slots occupied by
the supervisor engine and the standby supervisor engine. The CSM operates on power supplied by the
chassis.
Note
Catalyst 6000 Family Content Switching Module Installation and Configuration Note
10
Product Description
Content Switching Module
Content Switching Module
Content Switching Module
Console Cable
Accessory kit (contains the Console
Cable)
Slot 1 is reserved for the supervisor engine. Slot 2 can contain an additional supervisor
engine in case the supervisor engine in slot 1 fails. If a redundant supervisor engine is not
required, you can insert the CSM in slots 2 through 6 on the 6-slot chassis, in slots 2 through
9 on a 9-slot chassis, or slots 2 through 13 on the 13-slot chassis.
Minimum
Software Version
1.1(1)
1.1(1)
1.2(1)
Not applicable
Not applicable
o
o
o
o
to 40
C (32
to 104
F). The module can withstand, without
o
o
o
to 70
C (–40
to 158
Recommended
Software Version IOS Release
1.1(1) or higher
12.1(6)E or
12.1(7)E
1.2(1) or higher
12.1(8)E
1.2(1)
12.1(8a)E
Not applicable
Not applicable
Not applicable
Not applicable
o
F).
78-11631-02 Rev. A0
Advertisement
Chapters
Table of Contents
