Cisco CATALYST 6000 Installation And Configuration Note page 37
Catalyst 6000 series content switching module
Hide thumbs
Also See for CATALYST 6000:
- Manual (52 pages) ,
- Product bulletin (4 pages) ,
- Installation note (18 pages)
Table of Contents
Advertisement
Secure (Router) Mode Configuration
In secure (router) mode, the client- and server-side VLANs are on different subnets.
how the secure (router) mode configuration is set up.
Figure 10
Note
The addresses in
To configure Content Switching in secure (router) mode, perform this task:
Command
Step 1
Router(config)# vlan database
Step 2
Router(vlan)# vlan 2
Step 3
Router(vlan)# vlan 3
Step 4
Router(vlan)# exit
Step 5
Router(config)# ip slb vlan 2 client
Step 6
Router(config-slb-vlan-client)# ip addr
192.158.38.10 255.255.255.0
Step 7
Router(config-slb-vlan-client)# gateway
192.158.38.20
Step 8
Router(config-slb-vlan-client)# gateway
192.158.38.21
78-11631-02 Rev. A0
Secure (Router) Mode Configuration
Figure 10
refer to the steps in the following task table.
Catalyst 6000 Family Content Switching Module Installation and Configuration Note
Purpose
1
Enter the VLAN mode
.
Configure a client-side VLAN
Configure a server-side VLAN.
Exit to have the configuration take effect.
Create the client-side VLAN 2 and enter the SLB
VLAN mode.
Assign the CSM IP address on VLAN 2.
Define the client-side VLAN gateway to Router A.
Define the client-side VLAN gateway to Router B.
Configuration Examples
Figure 10
shows
2
.
37
Advertisement
Chapters
Table of Contents
