Cisco CATALYST 6000 Installation And Configuration Note page 29
Catalyst 6000 series content switching module
Hide thumbs
Also See for CATALYST 6000:
- Manual (52 pages) ,
- Product bulletin (4 pages) ,
- Installation note (18 pages)
Table of Contents
Advertisement
Router(config-slb-sfarm)# real 10.8.0.27
Router(config-slb-real)# inservice
Router(config-slb-real)# exit
Router(config-slb-sfarm)# exit
Router(config)# ip slb policy policy_url_2
Router(config-slb-policy)# serverfarm pl_url_url_2
Router(config-slb-policy)# url-map url_2
Router(config-slb-policy)# exit
Router(config)# ip slb vserver vs_url_url
Router(config-slb-vserver)# virtual 10.8.0.145 tcp 80
Router(config-slb-vserver)# slb-policy policy_url_1
Router(config-slb-vserver)# slb-policy policy_url_2
Router(config-slb-vserver)# inservice
Router(config-slb-vserver)# exit
Configuring Sticky Groups
Configuring a sticky group involves configuring the attributes of that group and associating it with a
policy.
To configure sticky groups, perform this task:
Command
Router(config)# ip slb sticky sticky-group-id
[netmask netmask | cookie name | ssl]
[timeout sticky-time]
1. The no form of this command restores the defaults.
This example shows how to configure a sticky group and associate it with a policy:
Router(config)# ip slb serverfarm pl_stick
Router(config-slb-sfarm)# real 10.8.0.18
Router(config-slb-real)# inservice
Router(config-slb-sfarm)# real 10.8.0.19
Router(config-slb-real)# inservice
Router(config-slb-real)# exit
Router(config-slb-sfarm)# exit
Router(config)# ip slb sticky 1 cookie foo timeout 100
Router(config)# ip slb policy policy_sticky_ck
Router(config-slb-policy)# serverfarm pl_stick
Router(config-slb-policy)# sticky-group 1
Router(config-slb-policy)# exit
Router(config)# ip slb vserver vs_sticky_ck
Router(config-slb-vserver)# virtual 10.8.0.125 tcp 90
Router(config-slb-vserver)# slb-policy policy_sticky_ck
Router(config-slb-vserver)# inservice
Router(config-slb-vserver)# exit
78-11631-02 Rev. A0
Catalyst 6000 Family Content Switching Module Installation and Configuration Note
Configuring the Content Switching Module
Purpose
Ensure that connections from the same client
matching the same policy use the same real
1
server
. Sticky time specifies the period of time
that the sticky information is kept. The default
sticky time value is 0 minutes. You must change
this timer to activate the sticky time.
29
Advertisement
Chapters
Table of Contents
