Table of Contents
Advertisement
(b) Remote READY (RWr0.b11)
This signal is used as an interlock condition when the master station reads/writes data.
After the bridge module is turned on, Remote READY (RWr0.b11) turns on.
If a moderate or major error (excluding a watchdog timer error) occurs, Remote READY (RWr0.b11) turns off.
(c) Warning status flag (RWr0.b12)
If a minor error occurs, Warning status flag (RWr0.b12) turns on.
When the cause of the error is removed, Warning code (RWr2) becomes 0 and Warning status flag (RWr0.b12)
turns off.
Warning code
(RWr2)
Warning status flag
(RWr0.b12)
Remote READY
(RWr0.b11)
(2) Error code (RWr1)
In Error code (RWr1), information in Error code (address: 8001
( Page 83, Section 9.5)
(3) Warning code (RWr2)
In Warning code (RWr2), information in Warning code (address: 8002
stored. ( Page 83, Section 9.5)
104
Executed in the bridge module
A minor error
has occurred.
0000
(Warning code)
H
ON
OFF
ON
The minor error
has been removed.
OFF
) of the module monitor/control area is stored.
H
) of the module monitor/control area is
H
0000
H
Advertisement
Table of Contents
Troubleshooting
