Table of Contents
Advertisement
(2) Removal procedure
(3) Applicable DIN rail model (compliant with IEC 60715)
• TH35-7.5Fe
• TH35-7.5Al
(4) Interval between DIN rail mounting screws
Tighten the screws at intervals of 200mm or less.
(5) DIN rail stopper
Use a stopper that is attachable to a DIN rail.
CHAPTER 6 INSTALLATION AND WIRING
1.
Remove the DIN rail stopper.
Remove the module in the reverse manner of (1).
2.
Remove the module from the DIN rail by pulling the
lower part of the module closer while pushing down
the DIN rail hook with a slotted screwdriver.
6
43
Advertisement
Table of Contents
Troubleshooting
