Table of Contents
Advertisement
3.3
Function List
The following table lists the functions of the bridge module.
(1) Functions of CC-Link IE Field Network
Function
CC-Link IE Field Network
diagnostic function
Module error collection function
Remote resetting function
*1
When the bridge module is reset with the remote resetting function, the CC-Link communication also stops.
(2) CC-Link functions
Function
Slave station cutoff function
Automatic return function
Automatic CC-Link startup
function
Slave station information saving
function
Temporary error invalid station
setting function
CC-Link data link stop/restart
Line test function
(3) Hardware functions
Function
Unit test function
Description
Checks for an network error from the engineering tool
connected to the master station using the CC-Link IE
Field Network diagnostic function.
Checks the error history of the bridge module from GX
Works2 connected to the master station using the CC-
Link IE Field Network diagnostic function.
*1
Resets the bridge module from the master station.
Description
Disconnects the CC-Link remote station where data link
cannot be performed due to power-off or other factors,
and continues data link in normal CC-Link remote
stations.
This function prevents the entire system from going
down caused by faulty one station.
Restarts data link when the CC-Link remote station
disconnected from data link due to power-off or other
factors returns to normal. This function shortens the
time to recover from an error.
Performs CC-Link data link simply by powering on the
module.
Saves the slave station information performing data link
by the automatic CC-Link startup.
Excludes the CC-Link where an error has occurred
during data link from being detected as a faulty station.
This function is used when the CC-Link remote station
is replaced during data link for maintenance or other
purposes.
Stops or restarts CC-Link data link using the remote
buffer memory. This function is used when data link is
stopped temporarily for maintenance or other purposes.
Checks whether a CC-Link dedicated cable is
connected correctly and the module is ready to perform
data link with the CC-Link remote station.
Description
Checks the hardware inside the bridge module.
CHAPTER 3 SPECIFICATIONS
Reference
Page 78, Section 9.3
Page 81, Section 9.4 (1)
Page 80, Section 9.3 (2)
Reference
Page 55, Section 7.2.1
Page 115, Appendix 2 (6) (a)
Page 116, Appendix 2 (6) (b)
Page 55, Section 7.2
Reference
Page 101, Section 9.8
23
3
Advertisement
Table of Contents
Troubleshooting
