Table of Contents
Advertisement
Address
Name
Temporary error
5E7
.b6
invalid station
H
setting information
Own station
5E7
.b8
switch change
H
detection
Slave station
refresh/compulsor
y clear
specification
5E7
.b12
H
status in the
programmable
controller CPU
STOP mode
Other stations
5E8
.b0
H
data link status
Watchdog timer
5E8
.b1
error status
H
(another station)
Blown fuse status
5E8
.b2
H
of another station
Other stations
5E8
.b3
switch change
H
status
Transmission
5F8
.b5
speed test
H
acceptance status
Transmission
5F8
.b6
speed test
H
completion status
114
Whether a temporary error invalid station has been set is stored.
OFF: Not set
ON: Set (The set station number is stored in Temporary error invalid status (address: 67C
There may be difference of several sequence scans between Temporary error invalid status (address:
67C
to 67F
) and its updated status, depending on the device transfer time and link scan time of the
H
H
bridge module.
Whether the setting of setting switches of the own station during data link has been changed is detected.
OFF: No change
ON: Changed
The parameter setting status of the slave station refresh/compulsory clear setting in case of
programmable controller CPU STOP is stored.
OFF: Refreshed
ON: Forcibly cleared
The status of communication with CC-Link remote stations is stored.
OFF: All the stations are normal.
ON: Some stations are faulty. (The information on faulty stations is stored in Other stations data link
status (address: 680
to 683
H
It takes a maximum of six seconds for Other stations data link status (address: 5E8
CC-Link remote station connected to the bridge module becomes faulty.
Whether a watchdog timer error has occurred in other stations is stored.
OFF: No error
ON: Error (The error information is stored in Watchdog timer error occurrence status (another station)
(address: 684
to 687
H
H
There may be difference of several sequence scans between Watchdog timer error occurrence status
(another station)(address: 684
and link scan time of the bridge module.
Whether a fuse blown error has occurred in other stations is stored.
OFF: No error
ON: Error (The error information is stored in Blown fuse status of another station (address: 688
68B
).)
H
There may be difference of several sequence scans between Blown fuse status of another station
(address: 688
to 68B
) and its updated status depending on the device transfer time and link scan time
H
H
of the bridge module.
Whether the setting of setting switches of other stations during data link has been changed is detected.
OFF: No change
ON: Changed (The information is stored in Other stations switch change status (address: 68C
68F
).)
H
There may be difference of several sequence scans between Other stations switch change status
(address: 68C
to 68F
) and its updated status depending on the device transfer time and link scan time
H
H
of the bridge module.
Whether Transmission speed test request (address: 5E0
OFF: No request accepted
ON: Request accepted
Whether the transmission speed test has been completed is stored.
OFF: Test not carried out
ON: Test completed
Description
).)
H
).)
to 687
) and its updated status depending on the device transfer time
H
H
.b11) has been accepted is stored.
H
to 67F
).)
H
H
.b0) to turn on after a
H
to
H
to
H
Advertisement
Table of Contents
Troubleshooting
