Interface Vlan - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

interface vlan

Use the interface vlan global configuration command to create or access a VLAN and to enter interface

configuration mode. Use the no form of this command to delete a VLAN.

Syntax Description

The default VLAN interface is VLAN 1.

Command Modes

Global configuration

Command History

Usage Guidelines

VLANs are created the first time that you enter the interface vlan vlan-id command for a particular

VLAN. The vlan-id corresponds to the VLAN-tag associated with data frames on an IEEE 802.1Q

encapsulated trunk or the VLAN ID configured for an access port.

If you delete a VLAN by entering the no interface vlan vlan-id command, the deleted interface is no

longer visible in the output from the show interfaces privileged EXEC command.

You cannot delete the VLAN 1 interface.

You can re-instate a deleted VLAN by entering the interface vlan vlan-id command for the deleted

interface. The interface comes back up, but the previous configuration is gone.

Catalyst 2960 Switch Command Reference

interface vlan vlan-id

no interface vlan vlan-id

VLAN number. The range is 1 to 4094.

Modification

This command was introduced.

Catalyst 2960 Switch Cisco IOS Commands

Show Quick Links

Table of Contents