Cisco Catalyst 2960 Command Reference Manual page 83

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Catalyst 2960 Switch Cisco IOS Commands

This example shows how to add a switch as member 2 with MAC address 00E0.1E00.2222 and the

password key to a cluster. The cluster command switch adds the candidate to the cluster through

Switch(config)# cluster member 2 mac-address 00E0.1E00.2222 password key vlan 3

This example shows how to add a switch with MAC address 00E0.1E00.3333 to the cluster. This switch

does not have a password. The cluster command switch selects the next available member number and

assigns it to the switch that is joining the cluster.

Switch(config)# cluster member mac-address 00E0.1E00.3333

You can verify your settings by entering the show cluster members privileged EXEC command on the

cluster command switch.

Related Commands

show cluster

show cluster candidates

show cluster members

Displays the cluster status and a summary of the cluster to which the

switch belongs.

Displays a list of candidate switches.

Displays information about the cluster members.

Catalyst 2960 Switch Command Reference

cluster member

Show Quick Links

Table of Contents