Table of Contents
Advertisement
Chapter 6
Cabling the Cisco RFGW-10 UEQAM
Note
The Cisco RFGW-10 Supervisor 7-E does not support the Fast Ethernet port. For network management
applications, use the 1 Gbps SFP port on a Cisco RFGW-10 DS-384 line card or the Cisco DS-48 line
card instead.
X2 Handling Guidelines and Installation
An X2 transceiver is a hot-swappable input/output device that plugs into the 10-Gigabit Ethernet port of
the Supervisor Engine and links the Supervisor Engine with a fiber-optic network. The X2 transceivers
are online swappable.
Table 6-6
Table 6-6
X2 10-Gigabit Ethernet Transceiver Specifications
Specification
Wavelength
Cabling distance
Connector
Mean launch power (maximum)
Minimum sensitivity
Dimensions
Warning
Class 1 laser product. Statement 1008
Do not stare into the beam or view it directly with optical instruments. Statement 1011
Warning
Use of controls, adjustments, or performing procedures other than those specified may result in
Warning
hazardous radiation exposure. Statement 1057
The following transceiver media types are supported:
•
•
•
•
•
Caution
Because of interoperability issues, Cisco does not support xenpaks purchased from third-party vendors.
OL-16264-04
lists the specifications for the 10-Gigabit Ethernet X2 transceiver.
1000BASE-T (WS-G5483)
1000BASE-SX (WS-G5484)
1000BASE-LX/LH (WS-G5486)
1000BASE-ZX (WS-G5487)
10GBASE-LR (X2-10GBASE-LR)
Description
1310 nm (1260 nm–1355 nm)
Up to 6.2 miles (10 km)
SC Duplex
+0.5 dBm
-14.4 dBm
3.5 in. x 1.58 in. x 0.76 in. (89.05 mm x 40.05 mm x 19.25
mm)
Cisco RF Gateway 10 Hardware Installation Guide
Cabling the Supervisor Engine
6-21
Advertisement
Table of Contents
