Table of Contents
Advertisement
Safety Recommendations
•
•
•
•
•
•
•
Safety Recommendations
The following guidelines will help to ensure your own safety and protect your Cisco equipment. This list
does not cover all potentially hazardous situations, so be alert.
•
•
•
•
•
•
•
•
•
Cisco RF Gateway 10 Hardware Installation Guide
2-2
Preventing Electrostatic Discharge Damage, page 2-15
Electrical Safety, page 2-15
Receiving a Cisco RFGW-10 UEQAM, page 2-17
Chassis-Lifting Guidelines, page 2-17
Tools and Equipment, page 2-19
Checking the Shipping Container Contents, page 2-20
Cisco RFGW-10 UEQAM Installation Checklist, page 2-21
Cisco safety policy is that all of its routers must conform to the requirements of IEC 60950, with
appropriate national deviations, as a minimum. In addition, Cisco routers must also meet the
requirements of any other normative documents (for example, standards, technical specifications,
laws or regulations).
Review the safety warnings listed in the Regulatory Compliance and Safety Information Guide that
accompanied your Cisco RFGW-10 UEQAM before installing, configuring, or maintaining the
router.
Never attempt to lift an object that might be too heavy for you to lift by yourself.
Always turn all the DC PEMs off and disconnect all power cables before opening the chassis.
Always disconnect the power cables before installing or removing a chassis.
Keep the chassis area clear and dust free during and after installation.
Keep the tools and chassis components away from walk areas.
Do not wear loose clothing, jewelry (including rings and chains), or other items that could get caught
in the chassis. Fasten your tie or scarf and sleeves.
The Cisco RFGW-10 UEQAM operate safely when it is used in accordance with its marked
electrical ratings and product usage instructions.
Chapter 2
Preparing Your Site for Installation
OL-16264-04
Advertisement
Table of Contents
