Viewing System Power Status - Cisco 7604 Configuration Manual
Ios software configuration guide
Hide thumbs
Also See for 7604:
- Configuration manual (742 pages) ,
- Installation manual (324 pages) ,
- User manual (98 pages)
Table of Contents
Advertisement
Understanding How Power Management Works
When you enter the no power enable module slot command to power down a module, the module's
Note
configuration is not saved.
This example shows how to power on the module in slot 3:
Router# configure terminal
Router(config)# power enable module 3
Viewing System Power Status
You can view the current power status of system components by entering the show power command as
follows:
Router# show power
system power redundancy mode = redundant
system power total =
system power used =
system power available =
PS
---- ------------------ ------- ------ ------ ------ -----
1
2
Slot Card-Type
---- ------------------ ------- ------ ------- ------ ----- -----
1
2
5
Router#
You can view the current power status of a specific power supply by entering the show power command
as follows:
Router# show power status power-supply 2
PS
---- ------------------ ------- ------ ------ ------ -----
1
2
Router#
You can display power supply input fields by specifying the power supply number in the command. A new
power-output field with operating mode is displayed for power supplies with more than one output mode.
Enter the show env status power-supply command as follows:
Router# show env status power-supply 1
power-supply 1:
power-supply 1 fan-fail: OK
power-supply 1 power-input 1: AC low
power-supply 1 power-output-fail: OK
Router# show env status power-supply 2
power-supply 2:
power-supply 2 fan-fail: OK
power-supply 2 power-input 1: none<<< new
power-supply 2 power-input 2: AC low<<< new
power-supply 2 power-input 3: AC high<<< new
power-supply 2 power-output: low (mode 1)<<< high for highest mode only
power-supply 2 power-output-fail: OK
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
54-4
1153.32 Watts (27.46 Amps @ 42V)
397.74 Watts ( 9.47 Amps @ 42V)
755.58 Watts (17.99 Amps @ 42V)
Power-Capacity PS-Fan Output Oper
Type
Watts
WS-CAC-2500W
1153.32 27.46
none
Pwr-Requested
Watts
WS-X6K-SUP2-2GE
142.38
-
WS-X6248-RJ-45
112.98
Power-Capacity PS-Fan Output Oper
Type
Watts
WS-CAC-6000W
2672.04
WS-CAC-9000W-E
2773.68
Chapter 54
Power Management and Environmental Monitoring
A @42V Status Status State
OK
OK
on
Pwr-Allocated
Admin Oper
A @42V Watts
A @42V State State
3.39
142.38
3.39
on
-
142.38
3.39
-
2.69
112.98
2.69
on
A @42V Status Status State
63.62 OK
OK
on
66.04 OK
OK
on
on
-
on
OL-4266-08
- Quick Links:
- Supported Hardware and Software
Hide quick links:
Advertisement
Chapters
Table of Contents
