Enabling Dhcp Option-82 Data Insertion; Enabling The Dhcp Option-82 On Untrusted Port Feature - Cisco 7604 Configuration Manual
Ios software configuration guide
Hide thumbs
Also See for 7604:
- Configuration manual (742 pages) ,
- Installation manual (324 pages) ,
- User manual (98 pages)
Table of Contents
Advertisement
Configuring DHCP Snooping
Enabling DHCP Option-82 Data Insertion
To enable DHCP option-82 data insertion, perform this task:
Command
Step 1
Router(config)# ip dhcp snooping information
option
Router(config)# no ip dhcp snooping information
option
Step 2
Router(config)# do show ip dhcp snooping |
include 82
This example shows how to disable DHCP option-82 data insertion:
Router# configure terminal
Enter configuration commands, one per line.
Router(config)# no ip dhcp snooping information option
Router(config)# do show ip dhcp snooping | include 82
Insertion of option 82 is disabled
Router#(config)
This example shows how to enable DHCP option-82 data insertion:
Router# configure terminal
Enter configuration commands, one per line.
Router(config)# ip dhcp snooping information option
Router(config)# do show ip dhcp snooping | include 82
Insertion of option 82 is enabled
Router#(config)
Enabling the DHCP Option-82 on Untrusted Port Feature
With the DHCP option-82 on untrusted port feature enabled, the router does not drop DHCP packets that
Note
include option-82 information that are received on untrusted ports. Do not enter the ip dhcp snooping
information option allowed-untrusted command on an aggregation router to which any untrusted
devices are connected.
With Release 12.2(18)SXF1 and later releases, to enable untrusted ports to accept DHCP packets that
include option-82 information, perform this task:
Command
Step 1
Router(config)# ip dhcp snooping information
option allow-untrusted
Router(config)# no ip dhcp snooping information
option allow-untrusted
Step 2
Router(config)# do show ip dhcp snooping
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
37-10
Chapter 37
Purpose
Enables DHCP option-82 data insertion.
Disables DHCP option-82 data insertion.
Verifies the configuration.
End with CNTL/Z.
End with CNTL/Z.
Purpose
(Optional) Enables untrusted ports to accept incoming
DHCP packets with option-82 information.
The default setting is disabled.
Disables the DHCP option-82 on untrusted port feature.
Verifies the configuration.
Configuring DHCP Snooping
OL-4266-08
- Quick Links:
- Supported Hardware and Software
Hide quick links:
Advertisement
Chapters
Table of Contents
