Cisco 7604 Configuration Manual page 254
Ios software configuration guide
Hide thumbs
Also See for 7604:
- Configuration manual (742 pages) ,
- Installation manual (324 pages) ,
- User manual (98 pages)
Table of Contents
Advertisement
Understanding MST
Spanning Tree Interoperation Between Legacy and Standard-Compliant Routers
Because automatic detection of prestandard routers can fail, you can use an interface configuration
command to identify prestandard ports. A region cannot be formed between a standard and a prestandard
router, but they can interoperate before using the CIST. Only the capability of load balancing over
different instances is lost in this specific situation. The CLI displays different flags depending on the
port configuration when the port receives prestandard BPDUs. A syslog message also appears the first
time a router receives a prestandard BPDU on a port that has not been configured for prestandard BPDU
transmission.
Figure 19-2
the standard-compliant router and B is a prestandard router, both configured to be in the same region. A
is the root bridge for the CIST, and so B has a root port (BX) on segment X and an alternate port (BY)
on segment Y. If segment Y flaps, and the port on BY becomes the alternate before sending out a single
prestandard BPDU, AY cannot detect that a prestandard router is connected to Y and continues to send
standard BPDUs. The port BY is fixed in a boundary, and no load balancing is possible between A and
B. The same problem exists on segment X, but B might transmit topology changes.
Figure 19-2 Standard-Compliant and Prestandard Router Interoperation
We recommend that you minimize the interaction between standard and prestandard MST
Note
implementations.
Detecting Unidirectional Link Failure
This feature is not yet present in the IEEE MST standard, but it is included in the standard-compliant
implemtation. The software checks the consistency of the port role and state in the received BPDUs to
detect unidirectional link failures that could cause bridging loops.
When a designated port detects a conflict, it keeps its role, but reverts to a discarding state because
disrupting connectivity in case of inconsistency is preferable to opening a bridging loop.
Figure 19-3
root bridge, and its BPDUs are lost on the link leading to router B. RSTP and MST BPDUs include the
role and state of the sending port. With this information, router A can detect that router B does not react
to the superior BPDUs it sends and that router B is the designated, not root bridge. As a result, router A
blocks (or keeps blocking) its port, thus preventing the bridging loop.
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
19-8
illustrates a standard-compliant router connected to a prestandard router. Assume that A is
Segment X
Switch A
Segment Y
illustrates a unidirectional link failure that typically creates a bridging loop. Router A is the
Chapter 19
Configuring Standard-Compliant IEEE MST
MST
Region
Switch B
OL-4266-08
- Quick Links:
- Supported Hardware and Software
Hide quick links:
Advertisement
Chapters
Table of Contents
