Configuring PFC QoS Statistics Data Export
Table 43-2 Supported PFC QoS Data Export Facility Parameter Values (continued)
Name
lpr
news
uucp
Table 43-3
Table 43-3 Supported PFC QoS Data Export Severity Parameter Values
Severity Parameter
Name
emerg
alert
crit
err
warning 4
notice
info
debug
This example shows how to configure 172.20.52.3 as the destination host and syslog as the UDP port
number and verify the configuration:
Router# configure terminal
Router(config)# mls qos statistics-export destination 172.20.52.3 syslog
Router(config)# end
Router# show mls qos statistics-export info
QoS Statistics Data Export Status and Configuration information
---------------------------------------------------------------
Export Status : enabled
Export Interval : 250 seconds
Export Delimiter : |
Export Destination : 172.20.52.3, UDP port 514 Facility local6, Severity debug
QoS Statistics Data Export is enabled on following ports:
---------------------------------------------------------
FastEthernet5/24
QoS Statistics Data export is enabled on following shared aggregate policers:
-----------------------------------------------------------------------------
aggr1M
QoS Statistics Data Export is enabled on following class-maps:
---------------------------------------------------------------
class3
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
43-8
Definition
line printer subsytem
netnews subsytem
uucp subsystem
lists the supported PFC QoS data export severity parameter values.
Number Definition
0
system is unusable
1
action must be taken immediately
2
critical conditions
3
error conditions
warning conditions
5
normal but significant condition
6
informational
7
debug-level messages
Chapter 43
Configuring PFC QoS Statistics Data Export
Name
Definition
local5
reserved for local use
local6
reserved for local use
local7
reserved for local use
OL-4266-08