hit counter script

Cisco 7604 Configuration Manual page 332

Ios software configuration guide
Hide thumbs Also See for 7604:
Table of Contents

Advertisement

Enabling Loop Guard
Command
Step 1
Router(config)# interface { type
{port-channel port_channel_number }
Step 2
Router(config-if)# spanning-tree guard loop
Step 3
Router(config)# end
Step 4
Router# show spanning-tree interface 4/4 detail
1.
type = ethernet, fastethernet, gigabitethernet, or tengigabitethernet
This example shows how to enable loop guard:
Router# configure terminal
Enter configuration commands, one per line.
Router(config)# interface fastEthernet 4/4
Router(config-if)# spanning-tree guard loop
Router(config-if)# ^Z
This example shows how to verify the configuration:
Router# show spanning-tree interface fastEthernet 4/4 detail
Port 196 (FastEthernet4/4) of VLAN0010 is forwarding
Port path cost 1000, Port priority 160, Port Identifier 160.196.
Designated root has priority 32768, address 00d0.00b8.140a
Designated bridge has priority 32768, address 00d0.00b8.140a
Designated port id is 160.196, designated path cost 0
Timers:message age 0, forward delay 0, hold 0
Number of transitions to forwarding state:1
The port is in the portfast mode by portfast trunk configuration
Link type is point-to-point by default
Bpdu filter is enabled
Loop guard is enabled on the port
BPDU:sent 0, received 0
Router#
For additional information (including configuration examples and troubleshooting information), see the
Tip
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
21-16
Purpose
1
Selects a port to configure.
slot/port } |
Configures loop guard.
Exits configuration mode.
Verifies the configuration impact on that port.
Chapter 21
Configuring Optional STP Features
End with CNTL/Z.
OL-4266-08

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

761376067609-s7600 series

Table of Contents