Cisco 7604 Configuration Manual page 840

Ios software configuration guide

Hide thumbs Also See for 7604:

Table of Contents

Configuring CDP

Router# show cdp interface [ type

Router# show cdp neighbors [ type

Router# show cdp traffic

Router# show debugging

1. type = ethernet, fastethernet, gigabitethernet, or tengigabitethernet

This example shows how to clear CDP counter configuration:

Router# clear cdp counters

This example shows how to display information about the neighboring equipment:

Router# show cdp neighbors

Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge

For additional information (including configuration examples and troubleshooting information), see the

documents listed on this page:

http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html

Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX

slot/port }]

slot/port ] [detail]

S - Switch, H - Host, I - IGMP, r - Repeater

Local Intrfce

Displays information about interfaces on which CDP is

Displays information about neighbors. The display can be

limited to neighbors on a specific interface and expanded to

provide more detailed information.

Displays CDP counters, including the number of packets sent

and received and checksum errors.

Displays information about the types of debugging that are

enabled. Refer to the Debug Command Reference for more

information about CDP debug commands.

Configuring CDP

Show Quick Links

Chapters

Table of Contents

7613 7606 7609-s 7600 series