Sample Configuration - Cisco 7604 Configuration Manual
Ios software configuration guide
Hide thumbs
Also See for 7604:
- Configuration manual (742 pages) ,
- Installation manual (324 pages) ,
- User manual (98 pages)
Table of Contents
Advertisement
Chapter 25
Configuring IPv4 Multicast VPN Support
This example shows how to enable data MDT logging:
Router(config-vrf)# mdt log-reuse
Sample Configuration
The following excerpt from a configuration file shows typical VRF configurations for a range of VRFs.
To simplify the display, only the starting and ending VRFs are shown.
!
ip vrf mvpn-cus1
rd 200:1
route-target export 200:1
route-target import 200:1
mdt default 239.1.1.1
!
ip vrf mvpn-cus2
rd 200:2
route-target export 200:2
route-target import 200:2
mdt default 239.1.1.2
!
ip vrf mvpn-cus3
rd 200:3
route-target export 200:3
route-target import 200:3
mdt default 239.1.1.3
!
...
ip vrf mvpn-cus249
rd 200:249
route-target export 200:249
route-target import 200:249
mdt default 239.1.1.249
mdt data 239.1.1.128 0.0.0.7
Displaying VRF Information
To display all of the VRFs that are configured on the router, use the show ip vrf command:
Router# show ip vrf
Name
green
red
Router#
To display information about the MDTs that are currently configured for all MVRFs, use the show ip
pim mdt command. The following example shows typical output for this command:
Router# show ip pim mdt
MDT Group
* 227.1.0.1
* 227.2.0.1
* 228.1.0.1
* 228.2.0.1
OL-4266-08
Default RD
1:52
200:1
Interface
Source
Tunnel1
Loopback0
Tunnel2
Loopback0
Tunnel3
Loopback0
Tunnel4
Loopback0
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
Configuring MVPN
Interfaces
GigabitEthernet6/1
GigabitEthernet1/1
GigabitEthernet3/16
Loopback2
VRF
BIDIR01
BIDIR02
SPARSE01
SPARSE02
25-13
- Quick Links:
- Supported Hardware and Software
Hide quick links:
Advertisement
Chapters
Table of Contents
