Configuring Layer 2 Protocol Tunneling; Understanding How Layer 2 Protocol Tunneling Works - Cisco 7604 Configuration Manual

Ios software configuration guide

Hide thumbs Also See for 7604:

Table of Contents

Configuring Layer 2 Protocol Tunneling

This chapter describes how to configure Layer 2 protocol tunneling on the Cisco 7600 series routers.

This chapter consists of these sections:

For additional information (including configuration examples and troubleshooting information), see the

documents listed on this page:

http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html

Layer 2 protocol tunneling allows Layer 2 protocol data units (PDUs) (CDP, STP, and VTP) to be

tunneled through a network. This section uses the following terminology:

Without Layer 2 protocol tunneling, tunnel ports drop STP and VTP packets and process CDP packets. This

handling of the PDUs creates different spanning tree domains (different spanning tree roots) for the

customer switches. For example, STP for a VLAN on router 1 (see

For complete syntax and usage information for the commands used in this chapter, refer to the Cisco

IOS Master Command List, Release 12.2SX at this URL:

http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html

The WS-X6548-GE-TX, WS-X6548V-GE-TX, WS-X6148-GE-TX, and WS-X6148V-GE-TX

switching modules do not support Layer 2 protocol tunneling.

Understanding How Layer 2 Protocol Tunneling Works, page 18-1

Configuring Support for Layer 2 Protocol Tunneling, page 18-2

Edge router—The router connected to the customer router and placed on the boundary of the service

provider network (see

Layer 2 protocol tunnel port—A port on the edge router on which a specific tunneled protocol can

be encapsulated or deencapsulated. The Layer 2 protocol tunnel port is configured through CLI

Tunneled PDU—A CDP, STP, or VTP PDU.

Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX

C H A P T E R

18-1) builds a spanning tree

Show Quick Links

Table of Contents

7613 7606 7609-s 7600 series