Displaying Igmp Snooping Statistics - Cisco 7604 Configuration Manual

Ios software configuration guide

Hide thumbs Also See for 7604:

Configuration manual (742 pages)

Installation manual (324 pages)

User manual (98 pages)

page of 1011

/ 1011
Contents
Table of Contents
Bookmarks

Table of Contents

Configuring IGMP Snooping for IPv4 Multicast Traffic

Displaying IGMP Snooping Information for a VLAN Interface

To display IGMP snooping information for a VLAN interface, perform this task:

Router# show ip igmp interface vlan_ID

This example shows how to display IGMP snooping information on the VLAN 200 interface:

Router# show ip igmp interface vlan 43

Vlan43 is up, line protocol is up

Internet address is 43.0.0.1/24

IGMP is enabled on interface

Current IGMP host version is 2

Current IGMP router version is 2

IGMP query interval is 60 seconds

IGMP querier timeout is 120 seconds

IGMP max query response time is 10 seconds

Last member query count is 2

Last member query response interval is 1000 ms

Inbound IGMP access group is not set

IGMP activity:1 joins, 0 leaves

Multicast routing is enabled on interface

Multicast TTL threshold is 0

Multicast designated router (DR) is 43.0.0.1 (this system)

IGMP querying router is 43.0.0.1 (this system)

Multicast groups joined by this system (number of users):

IGMP snooping is globally enabled

IGMP snooping is enabled on this interface

IGMP snooping fast-leave is disabled and querier is disabled

IGMP snooping explicit-tracking is enabled on this interface

IGMP snooping last member query interval on this interface is 1000 ms