Mitsubishi Electric FX3G SERIES Programming Manual page 166
Programmable controllers
Hide thumbs
Also See for FX3G SERIES:
- User manual (532 pages) ,
- Hardware manual (8 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
FX
/FX
/FX
Series Programmable Controllers
3G
3U
3UC
Programming Manual - Basic & Applied Instruction Edition
Outline
1. Instruction format
1)
The applied instruction number (FNC No.) and instruction mnemonic are indicated. The table below shows the
meaning of simplified expression.
Mark
FNC 12
No.
Instruction name
MOV
FNC 12
No.
D
Instruction name
MOV
FNC 12
No.
D
Instruction name
MOV
FNC 12
No.
D
Instruction name
MOV
FNC 12
No.
D
Instruction name
MOV
FNC 12
No.
D
Instruction name
MOV
FNC 12
No.
D
Instruction name
MOV
2. Set data
The contents of devices that can be specified as operands in instructions and available data types are described
below:
1)
Contents
The contents of operands in each instruction are described below.
2)
Indexing of the source and destination
In operands to which " " is added such as
Operands not allowing indexing are expressed as
3)
Data types
- Bit
- 16-bit BIN
- 32-bit BIN
- 64-bit BIN
- 16/32-bit BIN
- 32/64-bit BIN
- 4-digit BCD
- 8-digit BCD
- 4/8-digit BCD
- Character string
- Character string (only ASCII)
- Real number (binary)
- Real number (decimal)
164
Dotted lines on the upper left and lower left sides indicate an independent instruction
not associated with the 16-bit or 32-bit type.
P
Continuous lines on the upper left side indicates that 16-bit type is available. "D" on the
lower left side indicates that the 32-bit type is available.
P
Dotted lines on the lower left side indicate that the 32-bit type does not exist.
Continuous lines on the upper left side indicate that only the 16-bit type is available.
P
Dotted lines on the upper left side indicate that the 16-bit type does not exist. "D" on the
lower left side indicates that only the 32-bit type is available.
P
Continuous lines on the upper right side indicate that the continuous operation type is
available. "P" on the lower right side indicates that the pulse operation type is available.
P
Dotted lines on the lower right side indicate that the pulse operation type does not exist.
Continuous line on the upper right side indicate that only the continuous operation type
P
is available.
"
"
on the upper right side indicates that the contents of the destination change in
every operation cycle when the continuous operation type is used.
P
When operation should be executed only during the driving of an instruction, use the
pulse operation type indicated by "P" on the lower right side.
: Bit device
: 16-bit binary code
: 32-bit binary code
: 64-bit binary code
: 16-bit or 32-bit binary code
: 32-bit or 64-bit binary code
: 4-digit (16-bit) BCD code
: 8-digit (32-bit) BCD code
: 4-digit (16-bit) or 8-digit (32-bit) BCD code
: Character code such as ASCII code and shift JIS code
: ASCII code
: Binary floating point
: Scientific notation
6 What to Understand before Programming
6.1 How to Read Explanation of Instructions
Description
and
, indexing is available.
S
S
1
and
.
S
S
1
Applicable
instruction
(example)
WDT(FNC 07)
MOV(FNC 12)
CJ(FNC 00)
HSCS(FNC 53)
CMP(FNC 10)
MTR(FNC 52)
INC(FNC 24)
Advertisement
Table of Contents
