Gsm-Abis Congestion Critical - Cisco 3825 Software Configuration Manual
Mobile wireless edge router
Hide thumbs
Also See for 3825:
- Non proprietary security policy (30 pages) ,
- Installation and upgrades (20 pages) ,
- Quick start manual (138 pages)
Table of Contents
Advertisement
Appendix A
Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
gsm-abis congestion critical
Defines the critical timeslots that are exempt from suppression during congestion onset.
These are the timeslots that contain signalling and control information exchanged between the BSC and
Base Transceiver Station (BTS). To define the critical timeslots that are exempt from suppression during
congestion onset, use the gsm-abis congestion critical Interface configuration command.
Syntax Description
timeslot-range
Defaults
There are no default settings or behaviors.
Command Modes
Interface configuration
Command History
Release
12.4(2)MR
Examples
The following example shows how to set the timeslots range:
Router(config)# interface Serial10/1/0:0
Router(config-if)# no ip address
Router(config-if)# encapsulation gsm-abis
Router(config-if)# load-interval 30
Router(config-if)# gsm-abis local 10.10.10.2 6661
Router(config-if)# gsm-abis remote 10.10.10.1 5553
Router(config-if)# gsm-abis congestion enable
Router(config-if)# gsm-abis congestion critical 2-3
Router(config-if)# no keepalive
Related Commands
Command
gsm-abis congestion abate
gsm-abis congestion enable
gsm-abis congestion onset
gsm-abis jitter
OL-15667-03
gsm-abis congestion critical [timeslot-range]
Specifies a value or range of values for time slots that are exempt from
suppression during congestion onset. Use a hyphen to indicate a range.
Modification
This command was introduced.
Description
Sets the congestion abatement detection level at which the remote
router will stop suppressing timeslots because congestion has been
alleviated.
Sets the congestion detection algorithm to monitor the transmit
jitter buffer and to send congestion indicator signals to the remote
when congestion is detected.
Sets the congestion onset detection level at which the remote router
will start suppressing all timeslots that are not defined as critical in
an effort to alleviate the congestion.
Sets the amount of transmit jitter delay for the GSM-Abis interface.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
gsm-abis congestion critical
A-23
Hide quick links:
Advertisement
Table of Contents
