hit counter script

Ipran-Mib Threshold-Acceptable - Cisco 3825 Software Configuration Manual

Mobile wireless edge router
Table of Contents

Advertisement

Appendix A
Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

ipran-mib threshold-acceptable

Use the ipran-mib threshold-acceptable command in the global configuration mode to specify a level
of traffic below which the instances of the cirbhBackHaulRcvdUtilState and
cirbhBackHaulSentUtilState objects are marked as "acceptable." All changes to this threshold takes
affect at the end of the current interval. The value for this object must be less than the values specified
by ipran-mib threshold-warning and ipran-mib threshold-overloaded command keywords. This
parameter corresponds to the cirbhBackHaulAcceptableThreshold object.
Syntax Description
ipran-mib
threshold-acceptable
Defaults
60 percent.
Command Modes
Interface configuration
Command History
Release
12.4(2)MR1
12.4(9)MR
Examples
Router# config t
Router(config)# ipran-mib threshold-acceptable 50
Router(config)# ipran-mib threshold-acceptable 70
Router(config)# no ipran-mib threshold-acceptable
Router(config)# exit
Related Commands
Command
ipran-mib
threshold-overloaded
ipran-mib
threshold-warning
ipran-mib
backhaul-notify-interval
OL-15667-03
ipran-mib threshold-acceptable [20-100 Utilization (percent)]
Modification
This command was introduced.
Support for utilization notification was removed. This command is supported to
maintain compatibility.
ipran-mib threshold-acceptable percent.
Description
Specifies the amount of traffic that indicates the backhaul is
overloaded.
Specifies the amount of traffic that indicates the backhaul is carrying
traffic sufficient to impact performance, but is not overloaded.
Specifies the interval used to suppress the generation of utilization
notifications.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
ipran-mib threshold-acceptable
A-53

Advertisement

Table of Contents
loading

Table of Contents

Save PDF