Umts-Iub Local - Cisco 3825 Software Configuration Manual
Mobile wireless edge router
Hide thumbs
Also See for 3825:
- Non proprietary security policy (30 pages) ,
- Installation and upgrades (20 pages) ,
- Quick start manual (138 pages)
Table of Contents
Advertisement
umts-iub local
umts-iub local
To configure the local parameters required to establish an Internet Protocol/User Datagram Protocol
(IP/UDP) backhaul connection for use with the ATM path on the UMTS Iub interface, use the umts-iub
local Interface configuration command.
Syntax Description
ip-address
port
Defaults
There are no default settings or behaviors.
Command Modes
Interface configuration
Command History
Release
12.4(2)MR
Examples
The following example shows how to configure the local parameters:
Router(config)# interface ATM0/2/0
Router(config-if) atm umts-iub
Router(config-if) umts-iub local 10.10.10.2 5504
Related Commands
Command
umts-iub remote
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-126
umts-iub local [ip-address] [port]
(Optional) The IP address for the entry you wish to establish.
(Optional) The port you want to use for the entry you wish to establish.
Modification
This command was introduced.
Appendix A
Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
Description
Configures the remote parameters for an IP/UDP backhaul
connection.
OL-15667-03
Hide quick links:
Advertisement
Table of Contents
