Clock-Related Commands - Cisco 3825 Software Configuration Manual
Mobile wireless edge router
Hide thumbs
Also See for 3825:
- Non proprietary security policy (30 pages) ,
- Installation and upgrades (20 pages) ,
- Quick start manual (138 pages)
Table of Contents
Advertisement
Chapter 4
Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line
Figure 4-1
Clocking ----------------------------------------------->
BSC---z___MWR_A---z___MWR_B---z____BTS
The Base Station Controller (BSC) is responsible for providing the clock source into the network to
which the connected devices must synchronize its transmit clocks.
The BSC provides the clock source to the Cisco 3825 router, which is distributed to the participating
serial/ATM ports.
Clock-Related Commands
The following sections describe the uses of the clock-related commands:
•
•
•
Network-Clock-Participate Command
The network-clock-participate command allows the ports on a specified network module or
voice/WAN interface card (VWIC) or high-speed WAN interface card to use the network clock for
timing. For example:
mwr2(config)#network-clock-participate ?
aim
slot
wic
Use " aim" keyword to identify Advanced Integration Module
Use " wic" keyword to specify the voice/WAN interface card
Network-Clock-Select Command
The network-clock-select command names a source to provide timing for the network clock and to
specify the selection priority for this clock source.
To ensure that the router uses the correct interface as the primary (highest priority) clock source, this
command must be present to configure the clocking priority for the system. To establish the clocking
hierarchy (in case the primary source goes down), the same command needs to be repeated with a
different priority for each interface:
network-clock-select 1 e1 0/0/0
network-clock-select 2 e1 0/0/1
OL-15667-03
Clocking Example
Network-Clock-Participate Command
Network-Clock-Select Command
Clock Source Command
AIM
Module
Network Module Slot
WIC
Module
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
Clocking Requirements for Cisco 3825 Router
4-3
Hide quick links:
Advertisement
Table of Contents
