Appendix A
Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show l2tp session
To display basic information about all active L2TP sessions, use the show l2tp session command in the
user EXEC mode.
Syntax Description
This command has no arguments or keywords.
Command Modes
User EXEC
Command History
Release
12.1(1)T
12.1(2)T
12.4(12)MR2
Usage Guidelines
Use the show l2tp session command to display information about all active sessions using L2TP.
Examples
The following is sample output from the show l2tp session command on a device with active L2TP
sessions:
Router# show l2tp session
L2TP Session Information Total tunnels 1 sessions 4
LocID
9547
9580
9584
9595
Router#
Related Commands
Command
show l2tp domain
show l2tp group
show l2tp history failure
show l2tp multilink
OL-15667-03
show l2tp session
Modification
This command was enhanced to display Point-to-Point Protocol over
Ethernet (PPPoE) information.
This command was enhanced to display PPPoE session information on
actual Ethernet interfaces.
This command was integrated into Cisco IOS Release 12.4(12)MR2.
RemID
TunID
61932
2220
61966
2220
61970
2220
61981
2220
Username, Intf/
Vcid, Circuit
100, AT0/0:
1100, AT0/1:0/100
1200, AT0/1.1:
1101, AT0/1:0/101
Description
Displays all VPDN domains and DNIS groups configured on the NAS.
Displays a summary of the relationships among VPDN groups and
customer/VPDN profiles, or summarizes the configuration of a VPDN
group including DNIS/domain, load sharing information and current
session information.
Displays the content of the failure history table.
Displays the multilink sessions authorized for all VPDN groups.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
show l2tp session
State
Last Chg Uniq ID
est
2w6d
1
est
2w6d
21
est
2w6d
29
est
1w0d
37
A-91