Umts-Iub Remote - Cisco 3825 Software Configuration Manual
Mobile wireless edge router
Hide thumbs
Also See for 3825:
- Non proprietary security policy (30 pages) ,
- Installation and upgrades (20 pages) ,
- Quick start manual (138 pages)
Table of Contents
Advertisement
Appendix A
Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
umts-iub remote
To configure the remote parameters required to establish an Internet Protocol/User Datagram Protocol
(IP/UDP) backhaul connection for use with the ATM path on the UMTS Iub interface, use the umts-iub
local Interface configuration command.
Syntax Description
ip-address
port
Defaults
There are no default settings or behaviors.
Command Modes
Interface configuration
Command History
Release
12.4(2)MR
Examples
The following example shows how to configure the remote parameters:
Router(config)# interface ATM0/2/0
Router(config-if) atm umts-iub
Router(config-if) umts-iub remote 10.10.10.1 5502
Related Commands
Command
umts-iub local
OL-15667-03
umts-iub remote [ip-address] [port]
(Optional) The IP address for the entry you wish to establish.
(Optional) The port you want to use for the entry you wish to establish.
Modification
This command was introduced.
Description
Configures the local parameters for an IP/UDP backhaul
connection.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
umts-iub remote
A-127
Hide quick links:
Advertisement
Table of Contents
