Configuring The Backhaul Links - Cisco 3825 Software Configuration Manual
Mobile wireless edge router
Hide thumbs
Also See for 3825:
- Non proprietary security policy (30 pages) ,
- Installation and upgrades (20 pages) ,
- Quick start manual (138 pages)
Table of Contents
Advertisement
Chapter 4
Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line
When configuring an interface speed and duplex mode, follow these guidelines:
•
•
•
In the following procedure, press the Return key after each step unless otherwise noted. At any time,
Note
you can exit the privileged level and return to the user level by entering disable at the
To configure speed and duplex operation, follow these steps, while in the interface configuration mode:
Specify the duplex operation.
Step 1
Router(config-if)# duplex [auto | half | full]
Specify the speed.
Step 2
Router(config-if)# speed [auto | 1000 | 100 | 10]
Enabling the GE Interface
In the following procedure, press the Return key after each step unless otherwise noted. At any time,
Note
you can exit the privileged level and return to the user level by entering disable at the
Once you have configured the GE interface, enable it, by following this step, while in the interface
configuration mode:
Enable the interface.
Step 1
Router(config-if)# no shutdown
Configuring the Backhaul Links
To configure the backhaul links, complete the following tasks:
•
•
•
OL-15667-03
If both ends of the line support auto-negotiation, we highly recommend the default auto negotiation
settings.
When auto-negotiation is turned on for either speed or duplex mode, it auto- negotiates both speed
and the duplex mode.
If one interface supports auto-negotiation, and the interface at the other end does not, configure the
duplex mode and speed on both interfaces. If you use the auto-negotiation setting on the supported
side, the duplex mode setting will be set at half-duplex.
Configuring the Card Type for the Cisco 2-port
Configuring E1 Controllers, page 4-11
Configuring T1 Controllers, page 4-12
T1/E1-RAN, this page
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
Configuration Sequence
prompt.
Router#
prompt.
Router#
4-9
Hide quick links:
Advertisement
Table of Contents
