Note
If you press a register button in which a wipe snapshot
is already saved, the register data will be overwritten.
Recalling a wipe snapshot
1
Press the [WIPE] button.
The memory recall section switches to wipe snapshot
operation mode.
2
Press the button for the target register to recall.
The register button is lit orange and the wipe snapshot
is recalled.
To undo a wipe snapshot recall
To undo a wipe snapshot recall, press the [UNDO] button.
Deleting a wipe snapshot
1
Press the [WIPE] button.
The memory recall section switches to wipe snapshot
operation mode.
2
Press and hold the [DEL] button and press the button
for the target register to delete.
The wipe snapshot is deleted and the register button
changes to register number display.
Wipe Snapshot Operations (Menu)
The same memory recall buttons as in the memory recall
section of the Flexi Pad control block are displayed in the
Bus/Transition > Wipe > Wipe Snapshot menu on the
switcher bank. The settings and display of the memory
recall buttons in the Flexi Pad control block and in the
menu are linked.
This section describes the M/E-1 menu as an example.
Selecting a wipe pattern
1
Open the Home > M/E-1 > Bus/Transition > Wipe >
Wipe Snapshot menu (11109.37).
2
Press the [Current Pattern] button and enter a pattern
number in the numeric keypad window.
The icon for the selected wipe pattern is displayed on
the right side of the [Current Pattern] button.
Saving a wipe snapshot
Set a wipe and save a wipe snapshot register using the
following procedure.
1
Open the Home > M/E-1 > Bus/Transition > Wipe >
Wipe Snapshot menu (11109.37).
2
Press the [Store] button in the [Mode] group.
3
Press the button for the target register to save.
The register button is lit orange and the wipe settings
are saved in the snapshot.
Note
If you press a register button in which a wipe snapshot
is already saved, the register data will be overwritten.
Recalling a wipe snapshot
1
Open the Home > M/E-1 > Bus/Transition > Wipe >
Wipe Snapshot menu (11109.37).
2
Press the [Recall] button in the [Mode] group.
3
Press the button for the target register to recall.
The register button is lit orange and the wipe snapshot
is recalled.
Deleting a wipe snapshot
1
Open the Home > M/E-1 > Bus/Transition > Wipe >
Wipe Snapshot menu (11109.37).
2
Press the [Delete] button in the [Mode] group.
3
Press the button for the target register to delete.
The wipe snapshot is deleted and the register button
changes to register number display.
111