The current program output is displayed on the
preview output monitor.
2
Execute a transition.
The status during the transition is displayed on the
preview output monitor allowing you to check the
changes to the image.
Independent Key
Transitions
Overview
In addition to common transitions, you can configure
independent transitions for each key.
When an operation mode that supports configuration of
transitions where keys are inserted/removed independently
is set, the transition type and transition rate for inserting
and removing keys can be set separately.
For details about independent key transition operation
mode, see "Setting the Independent Key Transition Mode"
(page 311).
Transition type of independent key
transitions
You can set an independent key transition to the following
transition types.
• Mix
• Wipe
• DME wipe
• Cut
For details about transition types, see "Transition type"
(page 54).
Common transitions and independent key
transitions
Executing an independent key transition in combination
with a common transition enables different transition types
to be used for the background and keys.
You can also set a common transition and an independent
key transition for the same key.
If an auto transition is executed with both a common
transition and independent key transition configured, the
following occurs depending on the start timing of the
transitions.
When the common transition and independent
key transition are executed simultaneously
If a key is inserted:
The key is removed simultaneously in both transition
types. When the common transition ends, both
transitions are completed even if the independent key
transition is in progress.
If a key is not inserted:
The key is inserted simultaneously in both transition
types. The transitions are completed at the point when
both the common transition and independent key
transition have ended.
66