Assigning Control Panel
Buttons
You can select the functions to assign to the assignable
buttons of each control block in the control panel.
1
Open the Home > Setup > Panel > Module > Button
Assign menu (19104.21).
An image of the entire control panel appears.
Each control block is enclosed by a white frame.
2
Press the white frame of the target control block to set.
An enlarged image of the selected control block
appears.
A reduced image of the entire control panel is shown
at the upper right with the selected control block
indicated by a blue frame.
The assignable buttons are displayed in white and the
button name of the currently assigned functions are
displayed.
To return to the entire display
Press the [Back] button.
3
Press the target assignable button to set.
The [Select Function] window appears.
The functions that can be assigned to the selected
button are displayed in the [Select Function] window.
For a cross-point control block, select a tab to change
the function to display.
[Row-x Bus] tab (x = 1 to 4): Buttons for assigning a
bus or bank to the 1st row to 4th row
[Row-x Aux] tab (x = 1 to 4): Buttons for assigning
an AUX bus to the 1st row to 4th row
[Others] tab: Buttons for functions used in the cross-
point control block
1) Cannot be selected in key/AUX bus delegation mode.
2) [Row-3 Bus] tab and [Row-4 Bus] tab cannot be selected in key bus
mode.
3) Cannot be selected in key bus mode.
Note
In multi program 2 mode, you can set assignable
buttons in the cross-point control block, transition
control block, and Flexi Pad control block separately
on main and sub. When a switcher bank is set to shared
main and sub, the assignable button assignments are
also shared.
4
Set the button for the function to assign to the on state.
5
Press [OK].
To return assignable button assignments to the
defaults
Press the [Default Recall] button, check the message, then
press [OK].
1) 2)
1) 3)
317